1-2 | Wire Rope Sling ID Tag Requirements

<p>Learn more about wire rope sling tag requirements.</p>

person Mike Close
event June 25, 2020

Per ASME B30.9 …

The wire rope sling tag on all new slings shall be marked by the manufacturer to include:

  • Rated load for the types of hitches (single-leg vertical, choker, and basket) and the angle upon which they are based
  • The diameter or size
  • Name and trademark of the manufacturer
  • Number of legs, if more than one
Wire Rope Sling Identification Tagging Requirement

If the tag is missing or illegible …

The inspector should remove the sling from service and send it to the manufacturer for current or updated certification, tagging, and testing.

Lesson tags: wire rope sling tag
Back to: Lifting Sling Inspection Course > 1 | Wire Rope Sling Inspection
warning
Disclaimer:

Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.